Mobile
Log In Sign Up
Home > english-chinese > "melt pool" in Chinese

Chinese translation for "melt pool"

熔体池
熔体潭


Related Translations:
tissue pool:  组织池
anisotropic melt:  各向异性熔体
melting expansion:  熔融膨胀
fused melt:  熔炼焊剂
molten alumina:  熔融氧化铝
melting basin:  融水盆地
molten disease:  莫尔藤病,肝硬变
levitation melting:  磁力悬浮熔炼悬浮熔融法悬熔法
melt station:  溶化工段
consumably melted:  自耗电极熔炼的
Example Sentences:
1.Numerical analysis of ternary alloy molten pool heated by electron gun
电子枪加热三元合金熔池的数值分析
2.Circulating melt pool
环形熔化槽
3.Boiling molten pool
沸腾状溶池
4.Data extraction methodology of molten pool front - side geometrical parameters and back - bead width
焊接熔池正面几何参数和背面熔宽的数据提取方法
5.At quasi - state stage , the depth and rad ius of laser pool have small changes , but the highest surface temperature and velocity of molten pool decease rapidly
在凝固准稳态阶段,熔池熔深和半径变化较小,但表面最高温度、熔池流速急剧减小;凝固加速阶段则反之。
6.The paper introduced the principle of laser remanufacturing , the analysis and measurement method of temperature field in laser molten pool , and development of it in the world
本文就激光再制造的原理,温度场分析解法以及检测方法作了介绍,并综述了国内外发展现状。
7.The results of finite element analysis including the latent heat show lower maximum temperature , smaller size of melting pool , and narrower heat affected zone compared with the analysis neglecting the latent heat
考虑潜热的有限元模型分析结果和忽略潜热的计算结果比较,前者显示出较低的最高温度、较小的熔池范围和较窄的热影响域。
8.There are three controlling signs for output : the displacement of casting roller , the casting temperature , the surface height of melting pool . the executing element for rotate speed is the frequency conversion
三个控制信号,即三路输出,分别为:铸辊转速、铸辊位移、熔池液面高度,控制转速的执行元件为变频器,位移和熔池液面高度都用伺服阀进行控制。
9.In this thesis , ansys , which is finite element simulation software , was used to numerically simulate the temperature field and stress field in the sls of 316 stainless steel . in addition , this software was also used to qualitatively simulate the effect of ultrasonic vibration on the melting pool
本文利用有限元分析软件ansys ,针对316不锈钢激光烧结温度场、应力场进行了数值模拟;同时,对外加超声振动对熔池的影响进行了定性的模拟研究。
10.In this thesis , the response of melting pool of laser sintering under ultrasonic vibration was investigated . the results indicate that forced vibrations of the melting metal in the melting pool occurred under the ultrasonic vibration leading to the decrease of the viscosity of melting metal , which promotes the infiltration between melting pool and powder
关于激光烧结熔池在超声振动下的响应,模拟结果显示,熔池中的熔融金属在超声振动的作用下产生受迫振动,降低了熔融金属的粘度,促进熔池与基板和粉末的浸润。
Similar Words:
"melt phase polycondensation" Chinese translation, "melt pigmentation" Chinese translation, "melt pit" Chinese translation, "melt polycondensation" Chinese translation, "melt polymerization" Chinese translation, "melt potential" Chinese translation, "melt processing" Chinese translation, "melt processing rubber" Chinese translation, "melt proportioning pump" Chinese translation, "melt pulling method" Chinese translation